News - Automatic Faucet, Electronic Faucet, Thermostatic Sensor Tap Manufacturer & Supplier

Hot Keywords

Electronic Sensor Faucet Problems and Issues [2011-12-20]

The Electronic Sensor Faucet provide hands-free use enabling the user to wash his hands without touching handles which may have germs from previous users. They are also engineered to save money by limiting how long the water remains on while in use, and to restrict the amount of water pressure. Sensor faucets have been available for commercial applications for several years but have only recently become affordable for home use. Because of their automatic nature, some issues may arise that need to be addressed.

Leaky Electronic Sensor Faucet

If your Electronic Sensor Faucet drips, remove the aerator and clean the dirt filter. Reinsert the filter and activate the Electronic Sensor Faucet several times before you replace the aerator. This will flush the filter and remove any left over debris. Also, make sure that your Electronic Sensor Faucet setting is on the full "auto" position to ensure that the faucet knows when to turn off.

Incorrect Water Temperature

If your water temperature is too hot or cold, adjusting the Thermostatic Mixing Valve for the faucet can help achieve the temperature you need. Some faucets have optional thermostats available if you need an exact water temperature.

Low Water Flow

Water pressure on automatic faucets is dependent on the size of aerator that you are using. If you want more pressure from your faucet, installing a larger aerator may help.

Water Does Not Come On

Your water will not come on if the sensor is not receiving power. If your water does not come on, check your batteries and replace them if necessary. Others issues that could cause the water not to come on are unsuitable ground connections or a broken sensor wire. Check the wiring on the sensor to ensure that there are no broken wires and the sensor is properly grounded.

Faucet Does Not Turn Off

A drain ground that is improperly connected can prevent your water from turning off when you remove your hands from the sensor. You may need to press the faucet reset button after making any adjustments to the drain ground.

At last,Don't forget wash hands with Soap Dispenser.